Note: If you store telephone numbers with the international +prefix (created by pressing S twice) and the appropriate coun-try code, you can use the same phone number in all GSMcountries.Replacing InformationWhen you are storing a name and a telephone number andthe phone asks for the memory location number, key in the lo-cation number where the information that you want to re-place is located. Then press M. The message CHANGECONTENT? will appear. Press M to confirm.Moving InformationIf you want to move a number and a name from one memorylocation to another, recall the name and the number from thememory and press M.The text MOVE TO and the first empty memory locationnumber are shown on the display. Press M to confirm or keyin the desired memory location number (or use or tofind the desired location) and then press M. The content ofthe former location is erased and the information is stored inthe new memory location.WAKE-UP MESSAGEA wake-up message (number or name) may be displayedbriefly when the phone is switched on and/or the PIN code iskeyed in. The message is stored in the special memory loca-tion 999 in the phone’s memory (memory B).To recall the wake-up message, press 999 (memory B mustbe selected using Menu 2 5) and then R. A number is shown,if available. Press ABC and the name associated with thenumber is shown.EN31