P u s h t o t a l k691. To view the contact who sent the invitation and the channel addressif the group is not a private channel, select View.2. To add the channel to your phone, select Save.3. To set the status for the channel, select Active or Inactive.4. To decline the invitation, select View > Discard > Yes.■ PTT settingsThere are two kinds of PTT settings: settings for connecting to the serviceand settings for use.You may receive the settings for connecting to the service from your networkoperator or service provider. See “Configuration settings service,” p. 10.You can enter the settings manually. See “Configuration,” p. 54.To select the settings for connecting to the service, select Menu > Push to talk >Config. settings and one of the following options:Configuration — to select a service provider, Default, or Personal config. for PTTservice. Only the configurations that support the PTT service are shown.Account — to select a PTT service account in the active configuration settings.You can also select from other available options.To edit the PTT settings for use, select Menu > Push to talk > PTT settingsand one of the following options:1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls.To make but not receive one-to-one calls, select Off. The service provider mayoffer some services that override these settings. To set the phone to first notifyyou of incoming one-to-one calls with a ringing tone, select Notify.PTT key default function > Open contact list, Open channel list, Call contact/group, or Call PTT channelShow my login status > Yes — to enable the sending of the login statusPTT status in startup > Yes or Ask first — to set the phone to automaticallyconnect to the PTT service when you switch on the phonePush to talk when roaming — to switch the PTT service on or off when the phoneis used outside of the home networkSend my PTT address > No — to hide your PTT address from calls
