C a l l f u n c t i o n s213. Call functions■ Make a call1. Enter the phone number, including the area code. To delete an incorrectcharacter, select Clear.For international calls, press * twice for the international prefix (the + characterreplaces the international access code), then enter the country code, the areacode without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key, or selectOptions > End call.■ 1-touch dialingAssign a phone number to one of the 1-touch-dialing keys, 2 to 9. Call thenumber by one of the following ways:• Press a 1-touch-dialing key, then press the call key.• If 1-touch dialing is set to On, press and hold a 1-touch-dialing key until thecall begins. See 1-touch dialing in “Call,” p. 55.■ Enhanced voice dialingTo make a phone call, say the name that is saved in the contact list of the phone. Avoice command is added automatically to all entries in the contact list of the phone.Make a voice dialing callIf an application is sending or receiving data using a packet data connection, endthe application before you use voice dialing.Voice commands are language-dependent. To set the language, see Voicerecognition language in “Phone,” p. 56.Note: Using voice tags may be difficult in a noisy environment orduring an emergency, so you should not rely solely upon voice dialingin all circumstances.1. In the standby mode, press and hold the right selection key. A short tone isplayed and Speak now is displayed.If you are using a compatible headset with the headset key, press and holdthe headset key to start the voice dialing.
