T e x t e n t r y233. Character input: Press 0 to go through in the candidate list; press left scrollkey or right scroll key to highlight the Chinese character you want in thecandidate list. Press OK to select the highlighted character.4. Prediction: You phone will keep predictive function until you select Back.Press 0 to go through in the candidate list; press left scroll key or right scrollkey to highlight the Chinese character you want in the candidate list. PressOK to select the highlighted character.5. End prediction: You phone will keep predictive function until you selectBack. You can continue enter strokes for the next character.If the current predictive list does not show your desired character, press Backto delete predictive character, or enter the new strokes for the next character.6. Clear all strings you entered: After deleting all strokes of a character, pressClear to delete the characters to the left of the cursor; press and hold Clear todelete the inputted characters more quickly. Press down scroll key and upscroll key to move the cursor.Stroke input example: To input 你好1. Enter into the Create message.2. Input the stroke for 你 : Press 3, 2, 3, 5 and 2.3. Select 你 from the candidate list, and then press OK.4. Select the character 好 from the predictive list, and then press OK.5. You phone will keep predictive function until you select Back.■ Traditional English input1. Switch the input method to Upper Case status or Lower Case status, pleasesee "Switch between input methods" on page 19.2. Press a number key (2 - 9) to enter the first letter on the key, press twice toenter the second letter on the key and so on.If the next letter is located on the same key as the present one, press thedown scroll key or upward scroll key to finish the previous letter; or wait untilthe cursor appears.N6088_UG_EN_060728.fm Page 23 Friday, July 28, 2006 3:50 PM