G e t s t a r t e d14■ Switch the phone on and offWarning: Do not switch the phone on when wireless phone use isprohibited or when it may cause interference or danger.Press and hold the power key. See “Keys and parts,” p. 15.If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****),and select OK.Plug and play serviceWhen you switch on your phone for the first time, and the phone is in thestandby mode, you are asked to get the configuration settings from yourservice provider (network service). Confirm or decline the query.See Connect to service provider support, p. 45, and “Configurationsettings service,” p. 10.■ Normal operating positionUse the phone only in its normaloperating position.Your device has an external antenna.Note: As with any other radio transmittingdevice, do not touch the antenna unnecessarilywhen the device is switched on. Contact withthe antenna affects call quality and may causethe device to operate at a higher power levelthan otherwise needed. Avoiding contact with the antenna area when operatingthe device optimizes the antenna performance and the battery life.■ Wrist strapRemove the back cover and the battery.Insert the strap as shown in the picture.Replace the battery and the back cover.
