106Copyright © 2006 Nokia. All rights reserved.■ PTT settingsThere are two kinds of PTT settings: settings for connecting to the service andsettings for use.You may receive the settings for connecting to the service from your networkoperator or service provider. See “Configuration settings service,” p. 15. You canenter the settings manually. See “Configuration,” p. 77.To select the settings for connecting to the service, select Menu > Push to talk >Config. settings and from the following options:Configuration — to select a service provider, Default, or Personal config. for PTTservice. Only the configurations that support the PTT service are shown.Account — to select a PTT service account contained in the active configurationsettingsPTT user name, Default nickname, PTT password, Domain, and Server addressTo edit the PTT settings for use, select Menu > Push to talk > PTT settings.To select the phone to allow the reception of incoming one-to-one calls, select 1to 1 calls > On. To make but not receive one-to-one calls, select Off. The serviceprovider may offer some services that override these settings. To set the phone tofirst notify you of incoming one-to-one calls with a ringing tone, select Notify.To activate the listened groups, select Listened groups > On.To set the phone to automatically connect to the PTT service when you switch thephone on, select PTT status in startup > Yes.To hide your PTT address from group and one-to-one calls, select Send my PTTaddress > No.