Nokia 6110 User Manual

Also see for 6110 - Navigator Smartphone 40 MB: Specification sheet User guide User guide User guide Service manual

Contents

Nokia 6110 User Manual Manual pdf 88 page image

Connectivity87Copyright © 2007 Nokia. All rights reserved.Remote SIM mode > On — to enable the usage of the SIMcard of the device by another device (for example, a car kit)by Bluetooth technology (SIM access profile)When the wireless device is in the remote SIM mode, youcan only use a compatible connected enhancement, suchas a car kit, to make or receive calls. Your wireless devicewill not make any calls, except to the emergency numbersprogrammed into your device, while in this mode. To makecalls from your device, you must first leave the remote SIMmode. If the device has been locked, enter the lock code tounlock it first.Send dataThere can be only one active Bluetooth connection at atime.1 Open an application where the item you wish to send isstored.2 Scroll to the item you want to send, and selectOptions > Send > Via Bluetooth.The device starts to search for devices within range.Paired devices are shown with .When searching for devices, some devices may showonly the unique device addresses. To find out theunique address of your device, enter the code *#2820#in the standby mode.If you have searched for devices earlier, a list of thedevices that were found previously is shown first. Tostart a new search, select More devices.3 Select the device with which you want to connect.4 If the other device requires pairing, enter a passcode(1-16 digits) and agree with the owner of the otherdevice to use the same code.When the connection has been successfully established,Sending data is displayed.Data received using Bluetooth connection can be found inInbox in Messaging.Paired devices viewPaired devices are indicated by in the search result list.In the Bluetooth main view, scroll right to open a list ofpaired devices.Do not accept Bluetooth connections from sources you donot trust.To pair with a device, select Options > New paireddevice. Select the device with which to pair. Exchangepasscodes.To cancel pairing, scroll to the device whose pairing youwant to cancel and press the clear key. If you want tocancel all pairings, select Options > Delete all.