S e t t i n g s45Select Menu > Settings > Connectivity > Data transfer > Server synchronization.Depending on the settings, select Initializing synchronization or Initializing copy.Synchronizing for the first time or after an interrupted synchronization may takeup to 30 minutes to complete, if the contacts or calendar are full.USB data cableYou can use the USB data cable to transfer data between the phone and acompatible PC or a printer supporting PictBridge. You can also use the USB datacable with Nokia PC Suite.To activate the phone for data transfer or image printing, connect the data cable;when the phone displays USB data cable connected. Select mode., select OK.Select from the following modes:Default mode — to use the cable for PC SuitePrinting — to print images directly from the phone using a compatible printerTo change the USB mode, select Menu > Settings > Connectivity > USB datacable > Default mode, Printing, or Data storage.■ CallSelect Menu > Settings > Call and from the following options:Call forwarding — to forward your incoming calls (network service). You maynot be able to forward your calls if some call restricting functions are active.See Call restrictions in "Security," p. 48.Anykey answer > On — to answer an incoming call by briefly pressing any key exceptthe power key, the camera key, the left and right selection keys, or the end keyAutomatic redial > On — to make a maximum of 10 attempts to connect the callafter an unsuccessful call attempt1-touch dialing > On — to dial the names and phone numbers assigned to the1-touch-dialing keys 2 to 9 by pressing and holding the corresponding number keyCall waiting > Activate — to have the network notify you of an incoming callwhile you have a call in progress (network service). See "Call waiting," p. 21.Summary after call > On — to briefly display the approximate duration and cost(network service) of the call after each callSend my caller ID > Yes — to show your phone number to the person you are calling(network service). To use the setting agreed upon with your service provider,select Set by network.Line for outgoing calls — to select the phone line 1 or 2 for making calls if supportedby your SIM card (network service).
