Training & Vendor DevelopmentCMO Operations & LogisticsMultimedia Creation & Support CONFIDENTIAL 12.Sept.200725Service Manual 6131NFC RM-216 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.Approved 4.0MGRPage (40)19. Press onto the flex connector. A “click” noise can be heardwhen the connector lock properly.20. Check the flex connector if it is locked correctly.21. Snap in the C-COVER SERVICE ASSY into the D-COVER ASSY atthe shown position. First move it down-left, to lock the tophooks and then lock the middle hooks.22. Close the unit, turn it upside-down and fasten the two screwsin the order shown. Check C-D cover for gaps (especially in theantenna area), to ensure that it is properly closed.23. Mount the E-COVER and close the Flap. 24. Finally, assemble the KEYMAT, starting from the lower side.