Nokia 6136 User Manual

Also see for BT FUSION 6136: Setup guide User guide User guide User guide

Contents

Nokia 6136 User Manual Manual pdf 65 page image

S e t t i n g s65Synchronize from a compatible PCTo synchronize data from calendar, notes, and contacts from a compatible PC,use an infrared or a USB data cable connection. You also need the correct versionof Nokia PC Suite software for your phone installed on the PC. See ”PCconnectivity,” p. 100 for information about Nokia PC Suite.Synchronize the data in the phone contacts, calendar, and notes to correspondwith the data of your compatible PC by starting the synchronization from the PC.Synchronize from a serverTo use a remote Internet server, you have to subscribe to a synchronizationservice. For more information and the settings required for this service, contactyour service provider. You may receive the settings as a configuration message.See ”Configuration settings service,” p. 10 and ”Configuration,” p. 68.If you have saved data on the remote Internet server, you can synchronize yourphone by starting the synchronization from your phone.Select Menu > Settings > Connectivity > Data transfer > Server sync.Depending on the settings, select Initialising sync or Initialising copy.If the contacts or calendar are full, synchronizing may take up to 30 minutes tocomplete, when synchronizing for the first time, or after an interruptedsynchronization.USB data cableYou can use the USB data cable to transfer data between the memory cardinserted in the phone and a compatible PC or a printer supporting PictBridge. Youcan also use the USB data cable with Nokia PC Suite.To activate the memory card for data transfer or picture printing, connect thedata cable; when the phone displays USB data cable connected. Select mode.,select OK and one of the following options:Default mode — to use the cable for Nokia PC SuitePrinting — to print pictures directly from the phone using a compatible printer.Data storage — to activate the memory card for data transferTo change the USB mode, select Menu > Settings > Connectivity > USB datacable > Default mode, Printing, or Data storage.■ CallSelect Menu > Settings > Call and one of following options: