Copyright © 2005 Nokia. All rights reserved.S e t t i n g s53If data transfer is not started within 2minutes after the activation of the IRport, the connection is cancelled andmust be restarted.Connection indicator• When is shown continuously,the IR connection is activated andyour phone is ready to send orreceive data using its IR port.• When blinks, your phone istrying to connect to the otherdevice or a connection has beenlost.■ Voice commands andvoice tagsBefore using voice tags, note thefollowing:• Voice tags are not language-dependent, but depend on thespeaker’s voice.• You must say the name exactly asyou said it when you recorded it.• Voice tags are sensitive tobackground noise. Record voicetags, and use them in a quietenvironment.• Very short names are not accepted.Use long names, and avoid similarnames for different numbers.Note: Using voice tags may bedifficult in a noisyenvironment or during anemergency, so you should notrely on voice dialling in allcircumstances.Hands-free operationYou can set as many as 16 voicecommands to enable hands-freeoperation of certain features in yourdevice.Assign a voice tag to acommandBefore using voice commands,you must first add a voice tag to thedevice function.1. In standby mode, select Menu >Settings > Voice commands.2. Select the device function youwant to tag: Profiles, Voicemailbox, Radio, Voice recorder orCall register.3. If necessary, select an optionassociated with that function.4. Select Start, and speak the voicetag clearly into the microphone.Do not select Quit unless you wantto cancel the recording.The device replays and saves therecorded tag. appears next tocommands with voice tags assigned.