70Note: See “Special characters (for storing numbers)” onpage 37 for details on “p” and “w” characters.When you dial this number, your phone first dials the phonenumber, then waits (because of the “w” character) for youto press Send. Your phone then sends your password.If you include a “p” character instead of a “w”, yourphone pauses for 2.5 seconds, then automaticallysends your password as touch tones.Touch tone lengthThis feature determines the length of each touch tonewhen they are sent automatically.Short sets the tone length to .1 second. Long sets thetone length to .5 second.You can set the touch tone length by pressing Menu4 2 3 2 (Settings - Phone settings - Touch tones - Touchtone length).Unlocked phone numberWhen the phone lock is on (see page 52), no calls canbe made. However, you can store one number into yourphone that can be called when it’s locked.Storing the unlocked phone number1. Press Menu 4 3 2 2 (Settings - Security settings -Access codes - Unlocked phone number)2. Enter lock code and press OK3. Enter phone number at Number: (or press Searchand scroll through the phone book)4. Press OKCalling the unlocked phone numberNote: Your phone must be locked to use this feature.Press W or V once, then Û or you can manuallyenter the phone number as it is stored and pressÛ.
