Nokia 6175i User Manual

Contents

S e t t i n g s79FCC DRAFTFCC DRAFT2. Click USB Device in the Hardware devices window.The Stop a Hardware device message is displayed.3. Highlight USB device, and click OK.The pop-up window Safe to Remove Hardware is displayed with the message"The ‘USB Device’ device can now be safely removed from the system.4. Click OK.Data and fax transferYou can make data and fax transfers during a phone call. See "Data and fax calls,"p. 70.■ EnhancementsSelect Menu > Settings > Enhance-ments. You can select an enhancement menuif the phone is or has been connected to a compatible enhancement type.Depending on enhancement, select from the following options:Default profile—Choose the profile you wish to be automatically activated whena headset, car kit, or loopset is connected.Automatic answer—Answer calls automatically after one ring when a headset,car kit, loopset, or charger is connected. Select On or Off.Lights (for Handsfree or Charger only)—Choose to keep the phone lights alwayson, or to shut off automatically after several seconds. Select On or Automatic.If the Loopset is connected and recognized through the Pop-Port™ connector, thephone automatically uses the Loopset.TTY/TDD (network service)—Connect to a TTY/TDD device. Check with themanufacturer of the TTY/TDD device for a connecting cable that is compatiblewith your phone. Check with your service provider for availability and descriptionof services.■ SecurityTo access Security for the first time, you must enter the preset lock code.Depending on your wireless service provider, the preset lock code may be a fourdigit number such as 1234, 0000, or the last four digits of your phone number.If you enter the wrong lock code five times in succession, your phone will notaccept your current lock code for 5 minutes.This occurs even if when you power