Nokia 6225 User Manual

Also see for 6225: User guide User guide User guide Service manual User guide

Contents

Nokia 6225 User Manual Manual pdf 61 page image

54 Copyright © 2004 NokiaMAKE CALLSAfter you have saved your calling card information in your phone, you can make acall using your calling card.1 At the start screen, select Menu > Settings > Call settings > Calling card.2 Enter your security code (the default security code is 12345) and press OK.3 Scroll to the calling card of your choice, select Options > Select > OK.4 Press the End key to return to the start screen; then enter the phone number,including any prefix (such as 0 or 1), that your calling card may require whenyou make a calling card call.See your calling card for instructions.5 Press and hold the Talk key for a few seconds until Card call is displayed.6 When you hear the tone or system message, press OK.Receive data or fax callsData or fax calls is a Network Service. See “Network services” on page 3 formore information.If your wireless service provider supports this feature, then you can set up the phoneto send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.For better performance during data calls, place the phone on a stationary surfacewith the keypad facing downward. Do not move the phone by holding it in yourhand during a data call.Note: For more information on connectivity, refer to the PC/PDA ConnectivityGuide. The PC/PDA Connectivity Guide can be downloaded from the Nokiawebsite at http://www.nokia.com/us.1 At the start screen, select Menu > Settings > Call settings > Data/fax calls >Incoming data/fax call > Normal, Data calls only, or Fax calls only andpress Select:Normal—The phone receives incoming calls as usual.Data calls only—The phone receives only data calls.Fax calls only—The phone receives only fax calls.2 When you are finished receiving the fax or data call, repeat Step 1 andselect Normal.DATA TRANSFERYou can view the transmission speed when sending or receiving data or fax calls.At the start screen, select Menu > Settings > Call settings > Data/fax calls >Data rate display > Graphic or Off and press Select.