Copyright © 2004 Nokia. All rights reserved. 106Menu functions• Select Active access point and activate the access point you want to use.• Select Edit active access point to change the access point settings.• Select Alias for access point. Key in the name you would like for the activated access point andpress OK.• Select GPRS access point. Key in the Access Point Name (APN) to establish a connection to a(E)GPRS network and press OK. Contact your network operator or service provider for the APN.You can also set the (E)GPRS dial-up service settings (Access Point Name) on your PC using the NokiaModem Options software, see PC Suite on page 156. If you have set the settings both on your PC andon your phone, note that the PC’s settings will be used.Call settingsPress Menu, and select Settings and Call settings. Select• Call divert (network service). With call divert, you can direct your incoming calls to another number,for example, to your voice mailbox number. For details, contact your service provider. Divert optionsnot supported by your SIM card or your network operator may not be shown.Select the divert option you want, for example, select Divert if busy to divert voice calls when yournumber is busy or when you reject an incoming call.To set the divert setting to on, select Activate and then select the timeout after which the call isdiverted, if this is available for the divert option. To set the divert setting to off, select Cancel, orselect Check status, if this is available for the divert option, to check whether call divert is activatedor not. Several divert options may be active at the same time.To see the divert indicators in standby mode, see Standby mode on page 28.
