Copyright © 2004 Nokia. All rights reserved. 142Menu functionsFor more information and for the appropriate settings, contact the network operator or serviceprovider that offers the service that you want to use.To receive the service settings as configuration message, see Configuration settings service on page32.Keying in the service settings manually1. Press Menu, and select Services, Settings and Connection settings.2. Select Active service settings.3. Scroll to the connection set you would like to activate and press Activate.You need to activate the connection set where you want to save the service settings. A connectionset is a collection of settings required to make a connection to a service.4. Select Edit active service settings.Select each of the settings one by one and key in all the required settings according to theinformation you have received from your network operator or service provider. Note that all thebearer-related settings are in the Bearer settings menu.Making a connection to a serviceFirstly, make sure that the service settings of the service you want to use are activated. To activate thesettings:• Press Menu, and select Services, Settings and Connection settings. Select Active service settingsand scroll to the connection set you want to activate and press Activate.Secondly, make a connection to the service. There are three ways to connect:• Open the start page, for example, the homepage of the service provider:
