34 Copyright © 2004 NokiaOnce you change the security code from its preset of 12345, keep the new codesecret and in a safe place separate from your phone. Use this procedure to changeyour security code.1 From the menus, select Settings > Security settings > Access codes > Changesecurity code.2 At the prompt, enter the current security code (default 12345), and select OK.3 At the prompt, enter the new security code, and select OK.4 At the prompt, enter the new security code again, and select OK.PIN codeBefore you can change your PIN code, you need to enable PIN code request. See“PIN code request” on page 29.1 From the menus, select Settings > Security settings > Access codes >Change PIN code.2 At the prompt, enter the current PIN code, and select OK.3 At the prompt, enter the new PIN code, and select OK.4 At the prompt, enter the new PIN code again, and select OK.PIN2 codeThe PIN2 code is required for features such as fixed dialing. If you enter an incorrectPIN2 code three times in succession, the PIN2 code is blocked and you will have toenter the PUK2 code.The original PIN2 code must be obtained from your service provider.Use this procedure to change your PIN2 code.1 From the menus, select Settings > Security settings > Access codes >Change PIN2 code.2 At the prompt, enter the current PIN2 code, and select OK.3 At the prompt, enter the new PIN2 code, and select OK.4 At the prompt, enter the new PIN2 code again, and select OK.PUK and PUK2 codeThe PUK code is required to change a blocked PIN code. The PUK2 code is requiredto change a blocked PIN2 code. If the codes are not supplied with the SIM card,contact your service provider.6230.ENv1a_9310059.book Page 34 Monday, March 22, 2004 11:54 AM
