M e n u f u n c t i o n s63To set the phone to answer an incoming call automatically after five seconds,select Automatic answer. If Incoming call alert is set to Beep once or Off,automatic answer will not be in use.To set the lights permanently On, select Lights. Select Automatic to set the lightson for 15 seconds after a key press.To automatically switch off the phone, select Ignition detector > On. The phoneautomatically switches off approximately 20 seconds after you switch off the carignition, when the phone is connected to the full car kit.To use the text phone settings instead of headset or loopset settings, select Textphone > Use text phone > Yes.Configuration settingsYou can configure your phone with settings that are required for certain servicesto function correctly. The services are multimedia messaging, IM,synchronization, e-mail application, streaming, push to talk, and browser. Yourservice provider may also send you these settings. See "Configuration settings,"page 13. For information on availability and the appropriate configurationsettings, contact your network operator or service provider.Select Menu > Settings > Configuration, and from the following options:To view the service providers saved in the phone, select Default configurationsettings. Scroll to a service provider, and select Details to view the applicationsthat the configuration settings of this service provider supports.To set the configuration settings of the service provider as default settings, selectOptions > Set as default. To delete configuration settings, select Delete.To activate the default configuration settings for supported applications, selectActivate default in all applications.To view the saved access points, select Preferred access point. Scroll to an accesspoint, and select Options > Details to view the name of the service provider, databearer, and GPRS access point or GSM dial-up number.To add new personal accounts for various services, and to activate or deletethem, select Personal configuration settings.To add a new personal account if you have not added any, select Add new;otherwise, select Options > Add new. Select the service type, and select and entereach of the required parameters. The parameters differ according to the selectedservice type.