67 Copyright © 2005 NokiaSettings (Menu 7)5. Press and hold the Send key for a few seconds until Card call is displayed.6. When you hear the tone or system message, press OK.International prefixFor international calls, press the */+ key twice for the international prefix (the +character replaces the international access code) and then key in the countrycode, the area code without 0, and the phone number.Calls described here as international, in some cases, may be made betweenregions of the same country.Data/fax callsData or fax calls is a network service. See "Network Services," p. 6 formore information.If your wireless service provider supports this feature, you can set up the phone tosend or receive data or fax calls when a terminal, such as a PDA or PC, is connected.For better performance during data calls, place the phone on a stationary surfacewith the keypad facing downward. Do not move the phone by holding it in yourhand during a data call.. 1. In the standby mode, select Menu > Settings > Call settings > Data/fax calls >Incoming data/fax call.2. Select one of the following options:Normal—The phone receives incoming calls as usual.Data calls only—The phone receives only data calls.Fax calls only—The phone receives only fax calls.3. When you are finished receiving the fax or data call, repeat Steps 1 and 2 andselect Normal.Data transferYou can view the transmission speed when sending or receiving data or fax calls.In the standby mode, select Menu > Settings > Call settings > Data/fax calls >Data rate display > Graphic or Off.Call summaryYour phone can display the time spent on a call when you hang up.In the standby mode, select Menu > Settings > Call settings > Call summary >On or Off.
