S e t t i n g s87The activated feature code is now stored in your phone, and you are returned tothe Feature code: prompt. Continue entering other feature codes (for example,*900 to cancel Forward if busy), or press the end key to return to standby mode.When you enter a network feature code successfully the feature becomes visiblein the Network services menu.Call forwardingCall forwarding tells your network to redirect incoming calls to another number.Call forwarding is a network service and may not work the same in all networks,so contact your wireless provider for availability and information.To activate, do the following:1. In the standby mode, select Menu > Settings > Network services > Callforwarding and one of the following:Forward all calls—Forwards all calls to the number you specify.Forward if busy—Forward incoming calls when you are in a call.Forward if not answered—Forward incoming calls to another number if youare unable to answer. You can set a delay before forwarding takes place.Forward if out of reach—Forward incoming calls when your phone is off.2. Select Activate.3. Enter the number to which your calls, data, or other information areforwarded, and select OK.To cancel, in the standby mode, select Menu > Settings > Network services > Callforwarding > Cancel all call forwarding.Cancel all call forwarding may affect your ability to receive voice mail messages.Contact your wireless provider for specific details.Call waitingCall If your wireless provider supports this feature, call waiting notifies you of anincoming call even while you are in a call. You can accept, reject, or ignore theincoming call.To activate, in the standby mode, select Menu > Settings > Network services >Call waiting > Activate.During a call, select Answer or press the call key to answer the waiting call. Thefirst call is put on hold. Press the end key to end the active call.To cancel, in the standby mode, select Menu > Settings > Network services > Callwaiting > Cancel.
