C a l l f u n c t i o n s25Make a voice dialing callIf an application is sending or receiving data using a packet dataconnection, end the application before you use voice dialing.Voice commands are language-dependent. To set the language, seeVoice playback language in “Phone,” p. 69.Note: Using voice tags may be difficult in a noisy environment orduring an emergency, so you should not rely solely upon voice dialing inall circumstances.1. In the standby mode, press and hold the right selection key. A shorttone is played, and Speak now is displayed.If you are using a compatible headset with the headset key, press andhold the headset key to start the voice dialing.2. Say the voice command clearly. If the voice recognition wassuccessful, a list with matches is shown. The phone plays the voicecommand of the match on the top of the list. After about 1.5seconds, the phone dials the number; or if the result is not thecorrect one, scroll to another entry, and select to dial the entry.Using voice commands to carry out a selected phone function issimilar to voice dialing. See Voice commands in “My shortcuts,” p. 60.■ Answer or reject a callTo answer a call, press the call key. To answer the call by opening theslide, see also Slide call handling in “Call,” p. 68.To mute the ringing tone before you answer the call, select Silence.To end the call, or to reject a call, press the end key.Tip: If the Divert if busy function is activated to divert the calls(for example, to your voice mailbox), rejecting an incoming callalso diverts the call. See “Call,” p. 68.If a compatible headset supplied with the headset key is connected tothe phone, to answer and end a call, press the headset key.