Display 14: Modify "last used band"This display is applicable only in phones having both European andAmerican frequencies.With this display it is possible to manipulate the "last used band".In multi-band products this paramater is used at startup to decidewhich band shall be searched first. In most cases the last used bandis the most promising band to find networks in. Nevertheless, fortesting purposes it is helpful to have influence on this decision.If at startup no "last used band" is found in the memory, the"Default" setting (Europe or America) will be effective.1 Press the Menu button.2 Scroll in the main menu loop to field test display item.3 Press the Select button.4 Select this display in executive mode by entering 01.14 (TESTGROUP;TEST DISPLAY) to the query prompt.5 Test input prompt will activate, enter the desired band code (seethe table below) in display.6 Confirm with the Ok button.7 REMOVE BATTERY or POWER SUPPLY.NOTE:In normal operation the last used band is saved to the memory atpower-down. If this value is written via Test Display 01.14, thephone MUST NOT be powered off normally afterwards, because thenthe user-set value will be overwritten. The power supply has beinterrupted instead.24