Connect to Microsoft PocketPC devices[ 35 ]11• CONFIGURE A MODEM CONNECTIONThe procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windowsdesktop operating systems. However, before you can configure your PocketPC for a digital data call, you need to obtain the requiredsetup information from your ISP or corporate network’s Helpdesk.Important: You may need to first disable your Pocket PC’s option that automatically begins synchronization when aninfrared connection is detected. For more information on this task, please consult your device’s user guide.Creating a modem connectionTo create a new modem connection to your Internet service provider or corporate network:1 Tap the Start icon , then tap Settings.2 Tap the Connections tab, then tap Modem.3 Tap New Connection, then enter a name for the connection (example: Internet-Nokia phone).4 Click the modem selection drop-down arrow, then select the IrCOMM or Generic IrDA option for IR connections, or selectHayes Compatible on COM1 when using the DLR-3P for the connection.5 Tap Advanced to access additional configuration properties for Port Settings, TCP/IP, and Name Servers (if required by yourcorporate network or ISP).6 Tap OK to close the Advanced properties window, then tap Next.7 Enter the area code (if necessary) and phone number, then click Next.8 Tap Wait for dialtone to deselect this option, then tap Finish.Your new dialing configuration is now visible in the Modem Connections list.