©2001 Nokia Corporation. All rights reserved. 63Menu functionsSelect Ringing tone, Ringing volume and Vibrating alert for an incoming voice call and an incomingmessage. The vibrating alert does not work when the phone is connected to a charger, desktop stand,or a car kit.Tip: If you receive a ringing tone via IR or OTA, you can save ten ringing tones at a time in theringing tone list.Select Message alert tone to set the alert tone for the incoming messages, Keypad tones, or Warningtones to set the phone to sound tones, for example, when the battery is running out of power.Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selectedcaller group. Scroll to the caller group you want or All calls and press Mark.Accessory settingsThe accessory settings menu is shown only if the phone is or has been connected to one of thefollowing accessories: headsets HDC-5, HDE-2 or HDD-1, handsfree car kits PPH-1 and 132, mobileinductive loopset LPS-3 or Nokia Music Player.Press Menu, select Settings and Accessory settings. Select Headset, Handsfree or Loopset.• Select Default profile to select the profile you want to be automatically activated when youconnect the selected accessory. You can select another profile while the accessory is connected.• Select Automatic answer to set the phone to automatically answer an incoming call after fiveseconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be in use.• Select Lights to set the lights permanently on, On. Select Automatic to set the lights on for 15seconds after a keypress. The Lights option is available only when Handsfree is selected.
