Nokia 6560 User Manual

Also see for 6560: Manual

Contents

Nokia 6560 User Manual Manual pdf 54 page image

Advanced calling featuresNokia 6560 User Guide 45 Copyright © 2004 Nokia• SELECT A PHONE NUMBERYour service provider programs your phone number and system information into yourphone memory when your phone is first activated. Your phone can hold up to threenumbers. This means that your phone can be activated in three different service areas.Each service area would assign a different phone number or account to your phone.You must select a phone number for your home system. Only one phone numbercan be active at a time. If you travel outside your home system, you can chooseanother number. One phone number is usually enough if your service provider hasservice or roaming agreements for each area in which you wish to use your phone.Contact your service provider for details.You need at least one active number to make calls. You cannot change from onephone number to another during a call.Note: Phone number selection is a network dependent feature. Somenetworks may not support more than one number. Contact your serviceprovider for availability and full details.Select the phone number1 From the menu, select Menu > Settings > Network services > Ownnumber selection.2 Scroll to the phone number you want to use and press Select.• SET TOUCH TONESTouch tones (or DTMF tones) are sounds that are produced when you press the keyson your phone keypad. You can use touch tones for many automated over-the-phoneservices such as checking bank balances and airline schedules and using your voicemailbox. Touch tones can be sent only when a call is active.Warning: If you send touch tones while in the analog mode, be careful notto send confidential information.Set manual touch tones1 From the menu, select Settings > Phone settings > Touch tones > Manualtouch tones.2 Select one of the following options, and then press Select:Continuous—The tone sounds as long as you press and hold the key.Fixed—Sets the length of touch tones to Short.Off—Turns off the tones. No tones are sent when you press a key.Set lengthYou can set the length of each touch tone when you are in analog mode.From the menu, select Settings > Phone settings > Touch tones > Touch tonelength > Short or Long.