Nokia 6585 User Manual

Also see for 6585 - Cell Phone - CDMA2000 1X: Guide d'utilisation User guide Service manual User guide

Contents

Nokia 6585 User Manual Manual pdf 66 page image

Nokia 6585 User Guide 59 Copyright © 2004 NokiaSettings (Menu 7)4 Highlight the type of calls you want to restrict, and press Select:Restrict outgoing calls—Calls cannot be made.Restrict incoming calls—Calls cannot be received.5 Select an option from the following list:Select—Select the type of calls you wish to restrict by pressing Mark > Done.Add restriction—Enter the number you wish to restrict or press Search toretrieve a number from your contacts list.Edit—Make changes to a number that you have restricted.Delete—Press OK > OK to delete a number that you have restricted.When calls are restricted, calls may still be possible to the official emergencynumber programmed into your phone.Voice privacyVoice privacy is a network service. See “Network services” on page 3 for moreinformation. If your wireless service provider supports this feature, the voiceprivacy feature protects the privacy of your current phone conversation from othercallers placing phone calls on your same network.At the start screen, select Menu > Settings > Security settings > Voice privacy >On or Off.• NETWORK SERVICESThe following features are network services. See “Network services” on page 3 formore information.Store a feature code1 At the start screen, select Menu > Settings > Network services > Networkfeature setting.2 Enter the feature code from your service provider (for example, *633 foractivating Call forwarding) and press OK.3 Press Select when Call forwarding is displayed.4 Scroll to the type of forwarding that matches the feature code you entered (forexample, Call forwarding), press Select, then press Activate.The activated feature code is now stored in your phone, and you are returned tothe Feature code field. Continue entering other feature codes (for example, *633to cancel Forward if busy), or press the End key to return to the start screen.Note: Once you enter a network feature code successfully the featurebecomes visible in the Network services menu.