[ 95 ]Personalize your phone9SET UP THE LOOPSET PROFILEThe LPS-3 Loopset gives people with T-coil equipped hearing aids theability to make and receive calls without noise interference.Important: Refer to the booklet that comes with the LPS-3 forcomplete instructions and safety information.1 Plug the loopset jack into the bottom of your phone.2 Press Menu 4-5-3 (Settings > Accessory settings > Loopset).3 Scroll to Use loopset, then press Select.4 Scroll to Yes, then press Select.Note: The headset is the default accessory. If you follow steps 1through 4 above, you set the loopset as the default accessoryrecognized by your phone.SET UP CAR PROFILEIf you are using your phone with a Nokia-approved car kit, you can set lightsto On (lights stay on) or Automatic (after 15 seconds, lights turn off untilthe next key is pressed or the phone rings).ADJUST VOLUME CONTROLYou set your volume by adjusting the earpiece volume buttons. See“Understand your phone” on page 10 for an illustration of volumecontrol keys located on the left side of the Nokia 6590i phone.• CHOOSE THE DISPLAY LANGUAGEYou can choose your phone’s display language.1 Press Menu 4-3-1 (Settings > Phone settings > Language).2 Scroll to the language you want, then press Select.
