M e n u f u n c t i o n s54• To activate the selected profile, select Activate.• To set the profile to be active for a certain amount of time up to 24hours, select Timed and set the end time. When the time set for theprofile expires, the previous profile that was not timed, becomesactive.• To personalise the profile, select Personalise. Select the setting youwant to change and make the changes. The same settings can also bechanged in the Tone settings menu, see Tone settings on page 60.To rename a profile, Profile name. The General profile cannot berenamed.Tip: To change the profile quickly in standby mode, press thepower key , scroll to the profile you want to activate and pressSelect.■ Settings (Menu 5)Personal shortcutsYou can add some specific functions to your personal shortcut list andactivate them either by pressing Go to or accessing the Go to menu.Refer to Go to (Menu 15) on page 93 and Standby mode on page 13.To select the name for the right selection key and the functions for yourpersonal shortcut list, press Menu, and select Settings and Personalshortcuts.• To select the name for the right selection key displayed in standbymode, select Right selection key. Select an operator specific name,Go to or Contacts.• To select the desired functions for your personal shortcut list, selectSelect Go to options and the list of available functions is shown.Scroll to the desired function and press Mark to add it to theshortcut list.To remove a function from the list, press Unmark.
