Making calls24 Copyright © 2005 Nokia. All rights reserved.Answering or rejecting a video callWhen a video call arrives, you can see the icon .1 Press to answer the video call. Allow video image to be sent to caller? is shown.If you select Yes, the image being captured by the camera in your phone is shown tothe caller. If you select No, video sending is not activated, and a still image or no imageis shown. You will hear the sound. See Tools, Image in video call, p. ’97’.2 To end the video call, press .Call waiting (network service)You can answer a call while you have another call in progress if you have activated the Callwaiting function in Tools→ Settings→ Call→ Call waiting (see also p. ’24’).Tip! To change thephone tones for differentenvironments and events,for example, when youwant your phone to besilent, see Profiles -setting tones, p. ’12’.• To answer the waiting call, press . The first call is put on hold.• To switch between the two calls, press Swap. Select Options→ Transfer to connect anincoming call or a call on hold with an active call and to disconnect yourself from thecalls. To end the active call, press . To end both calls, select Options→ End all calls.Options during a callMany of the options that you can use during a call are network services. Press Optionsduring a call for some of the following options: Mute or Unmute, Answer, Reject, Swap,Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatibleBluetooth headset is attached), End active call or End all calls, New call, Conference, andTransfer. Select:Tip! You can addDTMF tones to the Phonenumber or DTMF fields ina contact card.• Replace - to end an active call and replace it by answering the waiting call.• Send MMS (in UMTS networks only) - to send an image or a video in a multimediamessage to the other participant of the call. You can edit the message and change therecipient before sending. Press to send the file to a compatible device (networkservice).
