Tools76Welcome note or logo - The welcome note or logo is displayed briefly each time youswitch on the phone. Select Default to use the default image, Text to write a welcome note(up to 50 letters), or Image to select a photo or picture from Gallery.Orig. phone settings - You can reset some of the settings to their original values. To dothis, you need the lock code. See ‘Security’, ‘Phone and SIM’, p. 80. After resetting thesettings, the phone may take a longer time to power on. Documents and files areunaffected.Standby modeYou can assign keypad shortcuts for the different keypresses in the standby mode:is the Left selection key, pressing is the same as Navigation key right, and is thesame as Selection key. You cannot have a shortcut to an application that you haveinstalled.Operator logo - This setting is visible only if you have received and saved an operator logo.You can choose if you want the operator logo to show or not.DisplayBrightness - You can change the brightness of the display to lighter or darker. The brighnessof the display is automatically adjusted according to the environment.Screen saver timeout - The screen saver is activated when the timeout period is over.Light time-out - Select a timeout after which the backlight will be switched off.Call settingsSend my caller ID (network service) - You can set your phone number to be displayed to(Yes) or hidden from (No) the person to whom you are calling; or the value may be set byyour network operator or service provider when you make a subscription (Set by network).Call waiting (network service) - If you have activated call waiting, the network will notifyyou of a new incoming call while you have a call in progress. Select Activate to requestFig. 12 The screen saverchanges to show thenumber of newmessages and missedcalls.