Nokia 6670 User Manual

Also see for 6670 - Smartphone 8 MB: User guide User guide User guide Quick start guide

Contents

Nokia 6670 User Manual Manual pdf 69 page image

68 Copyright © 2005 NokiaSummary after callActivate this setting if you want the phone to briefly display the approximateduration of the last call.1-touch dialingSelect On, and the numbers assigned to the 1-touch dialing keys (2–9) can bedialed by pressing and holding the key. See "Assign 1-touch dialing keys" onpage 34.Anykey answerSelect On, and you can answer an incoming call by briefly pressing any key,except the Right selection key, the Power key, and the End key.Line in use (network service)This setting is shown only if the SIM card supports two subscriber numbers,that is, two phone lines. Select the phone line (Line 1 or Line 2) you want touse for making calls and sending short messages. Calls on both lines can beanswered regardless of the selected line.You cannot make calls if you select Line 2 and have not subscribed to thisnetwork service.To prevent line selection, select Line change > Disable if your SIM cardsupports this function. To change this setting, you need the PIN2 code.• CONNECTIONSelect Menu > Settings > Connection > Access points, GPRS,Data call, or Configurations.Access pointsAn access point is where your phone connects to the mobile Internet by way of adata call or packet data connection. An access point can be provided, for example,by a commercial Internet service provider (ISP), service provider, or network operator.Many service providers require an Internet access point (IAP) for your defaultaccess point. Other service providers allow you to use a browser access point.Contact your service provider for more information.To define access point settings, select Menu > Settings > Connection >Access points. If you have not yet used your phone to make a WAP connection,you may need to contact your service provider for assistance with the first-timeconnection.Fill in these settings from the top because your Data bearer selectiondetermines which fields are available:• Connection name—Give a descriptive name for the data connection.