ToolsAccess point—The access point name is needed to use yourphone as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your networkoperator or service provider in a configuration message, orthe settings may be stored on your SIM or USIM card. Youcan save these settings to your phone, view, or delete themin Configurations.Date and timeSee “Clock settings” on page 6.See also the language settings in “General” on page 79.PIN code, PIN2 code, and Lock code—You can change thePIN code, PIN2 code, and lock code. These codes can onlyinclude the numbers from 0 to 9. See “Glossary of PIN andlock codes”, p. 85.Avoid using access codes similar to the emergencynumbers to prevent accidental dialling of the emergencynumber.If you forget any of these codes, contact your serviceprovider.Autolock period—You can set an autolock period, atime-out after which the phone automatically locks andcan be used only if the correct lock code is entered. Entera number for the time-out in minutes, or select None toturn off the autolock period.To unlock the phone, enter the lock code.Note: When the phone is locked, calls in offline