2 Place the card in the slot with thecontact area facing down (1), andpush the card gently to lock it intoplace (2).3 Replace the back cover.Charge the batteryYour battery has been partiallycharged at the factory. If the deviceindicates a low charge, do thefollowing:1 Connect the charger to a walloutlet.2 Connect the charger to the device.3 When the battery is fully charged,disconnect the charger from thedevice, then from the wall outlet.You do not need to charge the batteryfor a specific length of time, and youcan use the device while it is charging.If the battery is completely discharged,it may take several minutes before thecharging indicator appears on thedisplay or before any calls can bemade.Tip: If you have old compatible Nokiachargers, you can use them with yourdevice by attaching the CA-44 chargeradapter to the old charger. Theadapter is available as a separateaccessory.USB chargingYou can use USB charging when a walloutlet is not available. When chargingyour device with the USB data cable,the charging time is longer. USBcharging efficiency varies significantly.In some cases, it may take a very longtime for charging to start and thedevice to start functioning.With USB charging, you can alsotransfer data with the USB data cablewhile charging the device.1 Connect a compatible USB deviceto your device using a compatibleUSB data cable.Depending on the type of thedevice that is used for charging, itmay take a while for charging tostart.2 If the device is switched on, selectfrom the available USB modeoptions on the display of thedevice.Get started 9www.nokia.com/support 2010 Nokia. All rights reserved.©