G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d15. In the dialog that follows, click to choose Modem - Nokia6708 VSC Modem (WDM) and then click Next.16. In the dialog that follows, enter a connection name in theISP name box, and then click Next.17. Enter *99# in Phone number box in the dialog that followsand then click Next.18. Enter the user name and password in the dialog thatfollows and then click Next.Note: Consult your network service provider for theuser name and password if required.19. Click Finish, and then click Properties in the Connect Dial-up Connection dialog that follows.20. Click Configure, uncheck Enable hardware flow control andthen click OK.21. Click OK to return to the Connect Dial-up Connection3. Click the Hardware tab and then click Device Manager.4. Double-click Modems, and then Bluetooth Modem.5. In the dialog that appears, click the Advanced tab.6. Refer to the service provider’s setting to enter a commandin the Extra initialization commands box, and then click OK.An example of the command is+cgdcont=1,"ip", "APN"Note: APN (Access Point Node) is a setting by yournetwork service provider that tells how your datarequests should be routed. Consult your networkservice provider for the actual APN address.7. Double-click the My Bluetooth Places icon on the Desktopand select View devices in range. The Nokia 6708 icon (orthe name referred to your device) will appear.8. Double-click the Nokia 6708 icon and all available services9243393_6708_en_zh.book Page 97 Wednesday, March 15, 2006 4:51 PM