To change the clock displayed in the standby mode, select> Clock and Options > Settings > Clock type.To define what happens when you open or close the slide,select > Tools > Settings and General > Slidehandling.Display indicatorsThe device is being used in a GSM network (networkservice).The device is being used in a 3G network (networkservice).You have one or more unread messages in the Inboxfolder in Messaging.You have received new e-mail in the remote mailbox.There are messages waiting to be sent in the Outboxfolder.You have missed calls.The ringing type is set to silent.A timed profile is active.The device keypad is locked.A clock alarm is active.All calls to the device are diverted to another number(network service).A compatible headset is connected to the device.A data call is active (network service).A GPRS packet data connection is active (networkservice). indicates the connection is on hold andthat a connection is available.A packet data connection is active in a part of thenetwork that supports EGPRS (network service).indicates the connection is on hold and that aconnection is available. The icons indicate that EGPRSis available in the network, but your device is notnecessarily using EGPRS in the data transfer.A 3G packet data connection is active (networkservice). indicates the connection is on hold andthat a connection is available.High-speed downlink packet access (HSDPA) issupported and active (network service). indicatesthe connection is on hold and that a connection isavailable.Bluetooth connectivity is activated.Data is being transmitted using Bluetoothconnectivity. When the indicator is blinking, yourdevice is trying to connect with another device.A USB connection is active.Synchronisation is in progress.SupportWhen you want to learn more about how to use your productor you are unsure how your device should function, see thesupport pages at www.nokia.com/support or your localGet started 15www.nokia.com/supportCyanCyan MagentaMagenta YellowYellow BlackBlack