ClockWith Clock, you can view your local time or time in othercities, and use your device as an alarm clock.Alarm clockSelect > Applications > Clock.To view your active and inactive alarms, open the alarms tab.To set a new alarm, select Options > New alarm. Define therepetition, if needed. When an alarm is active, is displayed.To turn off the sounding alarm, select Stop. To stop the alarmfor a certain time period, select Snooze. If your device isswitched off when an alarm is due, your device switches itselfon and starts sounding the alarm tone.Tip: To define the time period after which the alarmsounds again when you set it to snooze, selectOptions > Settings > Alarm snooze time.To cancel an alarm, select Options > Remove alarm.To change the time, date, and clock type settings, selectOptions > Settings.To automatically update the time, date, and time zoneinformation to your device (network service), selectOptions > Settings > Automatic time update > On.World clockSelect > Applications > Clock.To view the time in different locations, open the world clocktab. To add locations to the list, select Options > Addlocation. You can add a maximum of 15 locations to the list.To set your current location, scroll to a location, and selectOptions > Set as current location. The location is displayedin the clock main view, and the time in your device is changedaccording to the selected location. Ensure that the time iscorrect and matches your time zone.Clock settingsSelect Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby modes, select Clocktype > Analog or Digital.To allow the mobile phone network to update the time, date,and time zone information to your device (network service),select Automatic time update > On.To change the alarm tone, select Clock alarm tone.Antenna locationsYour device has three integrated antennas: cellular antenna,Bluetooth antenna, and GPS antenna.Your device may have internal and external antennas. Avoidtouching the antenna area unnecessarily while the antennais transmitting or receiving. Contact with antennas affects thecommunication quality and may cause a higher power levelduring operation and may reduce the battery life.© 2004 Nokia. All rights reserved. 23