nokiaC ONNECTING PEOPLE PAGE 15 (24) Approved 2.0Nokia NMP/CMO Sales and MarketingCustomer Care EMEA SQX 00618-en DJkTechnical Services, Repair Concepts Confidential 12.03.2004Service Manual 6800 & 6810 Level 1&2 Copyright 2003-2004 © Nokia Corporation9. EXCHANGE OF DOME SHEETIt is very important to check the conditions of the Domesheet and the Engine Module. If smallamount of any liquid is recognized, it is recommended to clean the PWB and to change theDomesheet.Please note: Any liquid damage is a non-warranty repair!Remove the defective Domesheet carefully. Put the new Domesheet onto the Domesheet AssemblyJig. Note the guiding pins. Remove the protection foil.Place the Engine Module on the Jig. Note the guidingpins.Press on the Engine Module evenly.Lift the Engine Module with the new Domesheet fromthe Jig.Check that the Domesheet is correctly stuck to theEngine Module. Do not damage the spring contacts ofLCD connector.