Nokia 6800 User Manual

Also see for 6800: Guide d'utilisation User guide User guide User guide User guide

Contents

Nokia 6800 User Manual Manual pdf 66 page image

Nokia 6800 User Guide 59 Copyright © Nokia 2003SettingsAnykey answerSelect Menu > Settings > Call settings > Anykey answer. Select On and you cananswer an incoming call by briefly pressing any key, except f, selection keys cand b, and d.Automatic redialSelect Menu > Settings > Call settings > Automatic redial. Select On and yourphone will make a maximum of 10 attempts to connect the call after an unsuccessfulcall attempt.1-touch dialingSelect Menu > Settings > Call settings > 1-touch dialing. Select On and the namesand phone numbers assigned to the speed dialing keys, from 2 to 9, can be dialedwith the flip closed or open by pressing and holding the corresponding number key.Call waitingSelect Menu > Settings > Call settings > Call waiting > Activate. The networkwill notify you of an incoming call while you have a call in progress (network service).Summary after callSelect Menu > Settings > Call settings > Summary after call. Select On andafter each call the phone will briefly display the duration and cost (network service)of the call.Send my caller identitySelect Menu > Settings, Call settings > Send my caller identity. Select Yes andyour phone number will be displayed to the person you are calling (network service).Select Default and the setting agreed upon with your service provider is used.Line for outgoing callsLine for outgoing calls is a network service to select the phone line 1 or 2, that is,the subscriber number, for making calls.Select Menu > Settings > Call settings > Line for outgoing calls. If you selectLine 2 and have not subscribed to this network service, you will not be able to makecalls. However, calls on both lines can be answered regardless of the selected line.If supported by your SIM card, you can prevent the line selection by selecting theoption Lock.For more information on availability, contact your network operator or service provider.Tip: In standby mode, you can switch from one line to the other by pressingand holding p.