G e t t i n g s t a r t e d18■ Charging the battery1. Connect the lead from thecharger to the socket onthe bottom of your phone.2. Connect the charger to anAC wall socket.The text Charging isdisplayed briefly if thephone is switched on. If the battery is completely flat, it may take afew minutes before the charging indicator appears on the display orbefore any calls can be made.You can use the phone while the charger is connected.The charging time depends on the charger and the battery used. Forexample, charging a BLC-2 battery with the ACP-12 charger takes about1 hour and 30 minutes while the phone is in standby mode.■ Switching the phone on and offWarning: Do not switch the phone on when wireless phone use isprohibited or when it may cause interference or danger.Press and hold the power key .• If the phone requests a PIN code or a securitycode, key in the code, and press OK.See also Security settings on page 92 andGeneral information on page 13.• If the phone displays Insert SIM card eventhough the SIM card is properly inserted, orSIM card not supported, contact your networkoperator or service provider. Your phone does not support 5-Volt SIMcards and the card may need to be changed.rm-2_en1_FCC.fm Page 18 Monday, February 16, 2004 8:14 AM