56 Copyright © 2004 Nokia2 To access the list of names and phone numbers, move the joystick down in thestandby mode.3 Select the desired name, and select Details > Options > Add number or Add detail.4 To add a number or detail, select one of the number types or text types, respectively.• For the User ID, select Search to search for an ID by a mobile phone number or ane-mail address in the server of the network operator or service provider if you haveconnected to the presence service. If only one ID is found, it is automatically saved.Otherwise, to save an ID, select Options > Save.• To key in the ID, select Enter ID manually. Key in the ID, and select OK to save it.• To change the number or text type, select Change type in the options list.• To set the selected number as the default number, select Set as default.5 Key in the number or text item, and select OK to save it.6 Select Back > Exit to return to the standby mode.Add an image to a name or numberYou can add an image to a name or number saved in the phone memory. The image mustbe one of the supported formats (JPEG, GIF, WBMP, BMP, PNG, and OTA-BMP).Move the joystick down in the standby mode, scroll to the name (and number), and selectDetails > Options > Add image. The phone opens the list of folders in the Gallery. Scrollto the desired image, and select Options > Save to contacts.• SEARCH FOR A CONTACT1 Select Menu > Contacts > Find, or scroll down in the standby mode.2 Key in the first characters of the name for which you are searching in the pop-up window.Scroll up or down through the names in the list, and right or left to move the cursor inthe pop-up window.3 Scroll to the desired contact, and select Details.4 Scroll to view the details of the selected contact.Depending on the Contacts view setting in “Settings” on page 55, the subscribed contactsare shown differently. Either only the availability icon or the availability icon, personallogo, and the status message are shown.5 Select Details to view all dynamic information.To view the status message in full, select Details, and press and hold * at the dynamiccontact while scrolling through the contact names.