W e b83■ Connecting to a serviceMake sure that the service settings of the service you want to use areactivated. To activate the settings, select Menu > Web >Settings >Configuration settings > Configuration and select the configuration setyou want to activate.Connect to the service by one of the following methods:• Open the homepage of the service provider: select Menu> Web >Home, or in the standby mode, press and hold the 0 key.• Open a bookmark of the service: select Menu > Web > Bookmarksand select a bookmark. If the bookmark does not work with thecurrent active service settings, activate another set of servicesettings and try again.• Access the last URL: select Menu > Web > Last web addr..• Enter the address of the service: select Menu> Web >Go to address.Enter the address of the service, and select OK.■ Browse the pages of a serviceAfter you have connected to the service, you can start browsing itspages. The function of the device keys may vary in different services.Follow the text guides on the device display. For more information,contact your service provider.If GPRS is selected as the data bearer, the indicator is shown on thetop left of the display during browsing. If you receive a call or a textmessage, or make a call during a GPRS connection, the indicator willbe shown on the top left of the display to indicate that the GPRSconnection is suspended [on hold]. After a call, for example, the devicetries to reconnect the GPRS connection. See also ”GPRS connection” onpage 95.If you have tried to access or have accessed confidential informationrequiring passwords, empty the cache after each use. To empty thecache, see ”Cache memory” on page 86.