116Copyright © 2003 Nokia. All rights reserved.• Data bearer - Select GSM data or GPRS. Settings for the selected bearer, seeSettings when GSM data is the selected data bearer and Settings whenGPRS is the selected data bearer below.For pricing, connection speed and other information, contact your networkoperator or service provider.Settings when GSM data is the selected data bearer• Dial-up number - Key in the phone number and press OK.• IP address - Key in the address, press for a dot, and press OK. You obtainthe IP address from your network operator or service provider.• Authentication type - Select Secure or Normal.• Data call type - Select Analogue or ISDN.• Data call speed - Select the speed you want to use, or select Automatic.Automatic is available only if the current selected data call type is Analogue.The actual data call speed depends on the service provider.• Login type - Select Manual or Automatic.• User name - Key in the user name and press OK.• Password - Key in the password and press OK.Settings when GPRS is the selected data bearer• GPRS access point - Key in the access point name and press OK.An access point name is needed to establish a connection to a GPRS network.You obtain the access point name from your network operator or serviceprovider.
