1. In the standby mode, press and hold the right selection key. A short tonesounds, and Speak now is displayed.2. Say the name of the contact you want to dial. If the voice recognition issuccessful, a list with matches is shown. The phone plays the voice commandof the first match on the list. If it is not the correct command, scroll to anotherentry.Options during a callMany of the options that you can use during a call are network services. Foravailability, contact your service provider.During a call, select Options. The available options may include the following:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voiceclarity, Loudspeaker or Handset.Network options are Answer or Reject, Hold or Unhold, New call, Add toconference, End call, End all calls, and the following:● Send DTMF — to send tone strings● Swap — to switch between the active call and the call on hold● Transfer — to connect a call on hold to an active call and disconnect yourself● Conference — to make a conference call● Private call — to have a private discussion in a conference callWarning: Do not hold the device near your ear when the loudspeaker isin use, because the volume may be extremely loud.4. Write textText modesTo enter text (for example, when writing messages) you can use traditional orpredictive text input.When you write text, press and hold Options to toggle between traditional textinput, indicated by , and predictive text input, indicated by . Not alllanguages are supported by predictive text input.The character cases are indicated by , , and . To change the charactercase, press #. To change from the letter to number mode, indicated by , pressand hold #, and select Number mode. To change from the number to the lettermode, press and hold #.To set the writing language, select Options > Writing language.Write text© 2008 Nokia. All rights reserved.20