Nokia 7210 User Manual

Also see for Supernova 7210: Guide d'utilisation Repair hint Service manual Service manual Troubleshooting instructions

Contents

Nokia 7210 User Manual Manual pdf 50 page image

M e n u f u n c t i o n s36 Copyright © 2004 Nokia. All rights reserved.Select Call cost limit to limit thecost of your calls to a certainamount of charging units or unitsof currency. The PIN2 code isneeded for the call cost settings.Note: When no morecharging units orcurrency units are left,calls may only bepossible to theemergency numberprogrammed into yourphone (e.g. 112, 911 orother official emergencynumber).• GPRS data counter and scroll tocheck the amounts of sent andreceived data in last session, datasent and received in total, and toclear the counters. The countersunit is a byte. To clear thecounters, the security code isneeded.• GPRS connection timer scroll tocheck the duration of the lastGPRS connection or the totalGPRS connection. You can alsoclear the timers. To clear thetimers, the security code isneeded.■ Profiles(Menu 3)Your phone hasvarious setting groups, profiles, forwhich you can customise the phonetones for different events andenvironments. At first, personalisethe profiles to your liking and thenyou only need to activate a profile touse it. Available profiles are General,Silent, Meeting, Outdoor, and Pager.Press Menu, and select Profiles.Scroll to a profile and press Select.• To activate the selected profile,select Activate.• To set the profile to be active fora certain amount of time up to 24hours, select Timed and set theend time. When the time set forthe profile expires, the previousprofile that was not timed,becomes active.• To personalise the profile, selectPersonalise. Select the settingyou want to change and makethe changes.The settings can also be changedin the Tone settings menu, see”Tone settings” on page 42.To rename a profile, select Profilename and enter the new name.Tip: To change the profilequickly in standby mode,press the power key , scrollto the profile you want toactivate and press Select.