S e t t i n g s47To start the synchronization from your phone, select Menu > Settings >Connectivity > Data transfer > Server sync. Depending on the settings,select Initializing syn-chronization or Initializing copy.Synchronizing for the first time or after an interrupted synchronization maytake up to 30 minutes to complete.USB data cableYou can use the USB data cable to transfer data between the phone and a compatiblePC or a printer supporting PictBridge. You can also use the USB data cable withNokia PC Suite.To activate the phone for data transfer or image printing, connect the data cable.Confirm USB data cable connected. Select mode. and select from the following options:Nokia mode — to use the cable for PC SuitePrinting & media — to use the phone with a PictBridge compatible printer or withyour compatible PCData storage — to connect to a PC that does not have Nokia software and use thephone as a data storage deviceTo change the USB mode, select Menu > Settings > Connectivity > USB datacable > Nokia mode, Printing & media, or Data storage.■ CallSelect Menu > Settings > Call and from the following options:Call forwarding — to forward your incoming calls (network service). You maynot be able to forward your calls if some call restriction functions are active.See Call restrictions in "Security," p. 50.Voice clarity > Active — to enhance speech intelligibility especially innoisy environmentsAnykey answer > On — to answer an incoming call by briefly pressing any key, exceptthe power key, the camera key, the left and right selection keys, or the end keyAutomatic redial > On — to make a maximum of 10 attempts to connect the callafter an unsuccessful call attempt1-touch dialing > On — to dial the names and phone numbers assigned to the1-touch dialing keys 2 to 9 by pressing and holding the corresponding number keyCall waiting > Activate — to have the network notify you of an incoming callwhile you have a call in progress (network service). See "Call waiting," p. 20.
