17 — Power key18 — Loudspeaker19 — Camera lensWarning: The power key (17) and metallic trim in this device maycontain nickel. It is not designed for prolonged contact with the skin.Continuous exposure to nickel on the skin may lead to a nickel allergy.Switch the device on and offTo switch the device on or off, press and hold the power key.If the device prompts for a PIN or a UPIN code, enter the code (displayed as****), and select OK.The device may prompt you to set the time and date. Enter the local time, selectthe time zone of your location in terms of the time difference with respect toGreenwich mean time (GMT), and enter the date. See "Time anddate," p. 49.When you switch on your device for the first time and the device is in thestandby mode, you may be prompted to get the configuration settings fromyour service provider (network service). For more information refer to Connectto support. See "Configuration," p. 58. See "Configuration settingservice," p. 12.Standby modeWhen the device is ready for use, and you have not entered any characters, thedevice is in the standby mode.Y o u r d e v i c e20CyanCyan MagentaMagenta YellowYellow BlackBlackfile:/D:/temp/overmode/GUID-431D2638-1BD0-45C5-83AF-C38B84F5117C.20070514145238033.en1179145165145/en/1/GUID-0114949A-2FD0-4027-894A-63EEE9257447.xml Page 20 May 14, 2007 3:20:53 PM