1. Remove the back cover.2. Insert the memory card into thememory card slot with the contactsurface facing down, and press it untilit locks into place.3. Replace the back cover.Remove the memory cardImportant: Do not remove the memory card in the middle of anoperation when the card is being accessed. Removing the card in the middleof an operation may damage the memory card as well as the device, anddata stored on the card may be corrupted.You can remove or replace the memory card during phone operationwithout switching the device off.1. Ensure that no application is currently accessing the memory card.2. Remove the back cover.3. Press the memory card slightly in to release the lock, and remove it.4. Replace the back cover.Get started12 Get startedCharge the batteryYour battery has been precharged, but the charging levels may vary.1. Connect the charger to a wall outlet.2. Connect the charger to the device.3. When the battery is fully charged, disconnectthe charger from the device, then from thewall outlet.If the battery is completely discharged, it maytake a few minutes before the charging indicatorappears on the display or before any calls can be made.The charging time depends on the charger used. Charging a BL-4S batterywith the AC-3 charger takes approximately 3 hour while the phone is inthe standby mode.s