Nokia 9110 Quick Manual

Also see for COMMUNICATOR 9110: User manual Software guide Quick guide Connection guide Software guide

Nokia 9110 Quick Manual Manual pdf 14 page image

Quick guide103 Select a recipient and press Select.4 Press Send. If your message is longer than 160 characters, it will be sent asseveral short messages, provided that your network support this function.To read a received messageThere are two ways to read a received message:1 When you receive a note informing you that you have received a message,press View. To read the message later, press Cancel. Or,2 Select the Received messages folder and press Open. Select the messageand press Open.InternetInternet access requires that you have obtained an Internet access point froman Internet service provider and configured the Internet settings correctly.Contact your dealer for details.1 Press the Internet application button on the communicator keyboard.2 Choose one of the applications and press Select.The connection to the Internet is established via a data call. This requires thatdata calls are supported by the network you are using and that this service isactivated for your SIM card. Contact your service provider for details.To close the connection to the Internet, press Hang up in the Internet mainview.MailMail enables you to send and receive e-mail. Mail is compliant with theInternet standards SMTP, IMAP4, POP3, MIME1 and MIME2. Before using thisapplication, be sure to enter the correct Mail settings.To send mail1 Press Write mail and write the message.2 Press Recipient. The Mail directory opens.3 Select a contact and press Select. If the contact has several mailaddresses, choose the address from the pop-up box and press Select.4 The Mail envelope opens. In the Mail envelope you can check the sendinginformation and add more recipients by pressing Add recipient or enteringaddresses manually.5 Press Send.To read mailThe Mail application main view shows the Remote mailbox. The Remotemailbox, which receives all your mail, is located on a remote computer.1 Move the selection frame over the Remote mailbox and press Connect. The