83. The BasicsSwitching On/OffPress and hold the power key for one secondto switch the phone on or off.IMPORTANT! Do not switch on the phonewhen cellular phone use is prohibited or whenit may cause interference or danger.Making a CallIf your phone has an extendable antenna, extend theantenna fully. As with any other radio transmittingdevice, avoid unnecessary contact with the antennawhen the phone is switched on.Enter the area code + number, then press .Check with your operator to see if you must enter thearea code.If the PIN CALL is set to on, press again afterthe tone. See “To Activate PIN Call” on page 14 fordetails.If you make a mistake dialing, press to erase digitsone by one. Press and hold to clear the wholedisplay.NO SERVICE appears and a beep is given if you try tomake a call when your phone is outside of the cellularservice area.NOT ALLOWED appears if you try to make a restrictedcall.PRESS MENU appears if Keyguard is on.IN USE and the dialed phonenumber appears on thedisplay when you press. The call is connectedwhen the phone numberdisappears from the display.