Nokia 9211380 User Manual

Also see for 2600 classic: Specification sheet Service manual Datasheet User guide Quick start guide

Nokia 9211380 User Manual Manual pdf 7 page image

7The PIN code supplied with the SmartChip card, protects the card against unauthorized use.The PIN2 code supplied with some SmartChip cards, is required to access certain services.If you enter the PIN or PIN2 code incorrectly three times in succession, you are asked for thePUK or PUK2 code. If you do not have them, contact your local service provider.The module PIN is required to access the information in the security module of yourSmartChip card. The signing PIN may be required for the digital signature. The restrictionpassword is required when using the call restriction service.Select Menu > Settings > Security to set how your phone uses the access codes andsecurity settings.1. Get started■ Install the SmartChip card and batteryAlways switch the device off and disconnect the charger before removing the battery.Note: Always switch off the power and disconnect the charger and any other devicebefore removing the covers. Avoid touching electronic components while changingthe covers. Always store and use the device with the covers attached.• Push the release button and remove the back cover (1) and the battery (2).• Insert the SmartChip card (3).• Insert the battery (4) and replace the back cover (5).■ Charge the batteryWarning: Use only batteries, chargers, and enhancements approved by Nokia for usewith this particular model. The use of any other types may invalidate any approvalor warranty, and may be dangerous.Check the model number of any charger before use with this device. This device is intendedfor use when supplied with power from the AC-3 or AC-3U charger.This device is intended to use the BL-5BT battery.For availability of approved enhancements, please check with your dealer. When you disconnectthe power cord of any enhancement, grasp and pull the plug, not the cord.2600_ENv1_9211380.fm Page 7 Thursday, August 7, 2008 2:47 PM